Skip links
SAWING
Tube HT Pro

Circular Saw Blade TCT TUBE HT Pro Kinkelder

Bilah gergaji bundar ini merupakan gergaji khusus yang dirancang untuk pemotongan tabung dengan tegangan tinggi. Menghasilkan pemotongan yang halus dan bersih dengan getaran yang berkurang, sehingga meningkatkan efisiensi operasional dan kualitas produk. Sempurna bagi produsen yang ingin mengoptimalkan proses pemotongan tabung mereka dengan pisau yang memiliki daya tahan dan kinerja tinggi.

Categories: , ,

Description

Your Ultimate Solution For Tube Cutting Performance

Maximize the efficiency of your tube cutting operations with the TUBE HT Pro saw blade. With cutting speeds reaching up to 330 meters per minute and high feed rates, this PVD-coated carbide-tipped blade is the ultimate solution for high-volume and high-tensile tube applications. Specifically engineered for cutting various types of high-tensile tubes, it excels in applications requiring tensile strengths between 1,000 and 1,500 N/mm².

Tube HT Pro

Advantages

Suitable for all types of tubes.
Specifically designed for cutting high tensile tubes with a high output.
Higher blade life, especially when cutting higher tensile strength tubes.
Very high feed rates.
Because the cut surface is as close to the end stage as possible, you will minimize or avoid post-machining, save cycle time and tool costs.

Applications

Cutting high tensile tubes with high output (best performing between 1,000 – 1,500 N/mm2).
Cutting speeds up to 330 m/min.
Tooth load: 0,035 – 0,20 mm/tooth.
When focussing on output, using high parameters is advised. Please note, this does come at the expense of blade life.
When focussing on blade life, using regular parameters is advised.

Typical applications include:

        • Seating components, headrests
        • Sleeves, cylinders, bushings
        • Drive shafts, side shafts, half shafts
        • Twistbeam
        • Chassis / body structures, stabilizer bars, instrumental panel beams
        • Camshafts, piston rods
        • Suspensions, shock absorber parts
        • Steering mechanics
        • Fittings, couplings
        • Differentials

Typical steel grades:

          • Carbon steel (E355 +C)
          • High Carbon, high tensile
          • ‘Sticky’ materials
          • High Strength Low Alloy (HSLA)
          • Advanced High Strength Steel (AHSS)
          • Manganese (Mn) alloyed
          • Boron (B) alloyed
          • Docol (SSAB)
          • Dual Phase (DP, ArcelorMittal)
          • XPF grades (Tata)
          • Specifically: 22MnB5 / 26MnB5 / 27MnB5 , 34CrMo4/
                     34CrMo4-HC / 34CrMo4-LC / 34MnB5 , MW1000L /                  MW700L

Typical Machines
Manufacturer Machine type
Rattunde ACS
RSA Rasacut
Sinico Top
Bewo DCH / SCF (single/double)
Soco SA series
Adige / BLM TS/CM series

STANDARD RANGE TUBE HT PRO
Diameter  (mm) Kerf (mm) Bore hole  (mm) Pinholes No. of teeth(z)
315 2,3/2,0 32 4/9/50 4/12/64 100
315 2,3/2,0 32 4/9/50 4/12/64 120
315 2,3/2,0 40 2/9/55 4/12/64 100
315 2,3/2,0 40 2/9/55 4/12/64 120
350 2,7/2,5 50 4/16/80 100
350 2,7/2,5 50 4/16/80 120
350 2,7/2,5 50 4/16/80 140

Related Products

Home
Account
Cart
Search